15 round high capacity magazine conversion kit for GSG / Sig Sauer and Mauser 1911 22 pistols

Home > Magazine Upgrades >

15 Round 1911 22LR Magazine Upgrade - Set of 5 SILVER

GSG 922 | High Capacity Magazine | Conversion Kit | GSG M-1911 | Sig Sauer 1911 | Mauser 1911 | Shockbottle +2 | Aluminum Basepad | HiCap follower | high capacity | magazine extension | 22lrupgrades | 411.60.03.1 | 411.60.02.1 | bumper | nictaylor

Alternative Views:

Fits GSG, Sig Sauer and Mauser 1911-22 pistols. Convert five of your 1911 22LR magazines and save with the bundled 5-Pack of basepads and followers. The High Capacity Magazine Upgrade converts your factory 10 round magazine to a 15 round magazine! With a round in the chamber and 15 in the mag, that's 16 rounds in gun! The High Capacity Magazine Upgrade replaces the factory plastic basepad and factory follower with with an aluminum +2 (Plus 2) basepad and High Capacity Follower. The +2 basepad is also longer than the factory plastic basepad and allows for more positive seating of the magazine in the gun. Additionally the aluminum construction is more durable than factory plastic basepads making your magazine less prone to breakage upon dropping.

Choose between the old style Orange or the New Enhanced Blue follower from NicTaylor with improvements over the old orange style. The engagement tab for the slide lock has been increased to help with fully engaging the slide lock. Additionally the rear pin on the follower has been redesigned to help reduce follower tilt and give more reliable feeding. If you have had issues with the orange followers in the past, you need to try this new enhanced follower.

Our Price: $114.95

Shipping: Usually Ships in 1 to 2 Business Days
Part #: 200-15RD-1911-SLVR-5PK

Follower:

Qty:	Email me when Back-In-Stock

Installation Instructions

RESTRICTIONS

1) Remove factory basepad and retainer plate.

2) Remove magazine spring and slide factory follower down to base of magazine so that the load assist pin can be removed from the follower. NOTE: YOU WILL NOT USE THE METAL PIN WITH THE BLUE FOLLOWER

3) Remove factory follower.

4) Insert HiCap follower into the magazine body.

5) Insert magazine spring into magazine body.

6) Compress spring into magazine body and slide on the aluminum basepad. Assure that the spring is in the pocket of the basepad.

7) Finger tighten set screw with the included hex wrench.