FN 502 22LR 17 round follower converts a factory 15 round magazine to a 17 round clip for the Tactical and MRD models

Home > Magazine Upgrades >

FN 502 Tactical / MRD 22LR 17 Round Follower (+2 Follower)

FN502 | FN502 Tactical | FN502 magazine | FN 502 | follower | hi-cap | FN 502 Tactical | magazine | FN 502 magazine | high capacity adapter | nictaylor | 20-100503 | replacement part | 22lrupgrades | 0845737013455 | 66-101169 | 502 Tactical | 502 MRD

With the HiCap +2 (Plus 2) follower you can turn your factory 15 round FN502 22lr magazines into a 17 Round Magazine. Fits both the Tactical and MRD models. The shorter follower allows for more space in the magazine tube so that it will fit an additional one (2) round in the mag. Please note that this follower will NOT add any capacity to the factory 10 round magazine.

PLEASE READ BEFORE PLACING YOUR ORDER
Since the button on the factory magazine is removed when installing the high capacity parts, the function of locking the slide open on the last shot fired is lost. That button on the side of the factory magazine is used to actuate the slide lock feature on the gun. The NicTaylor follower is designed to catch the slide itself and thus lock the slide back/open. This technique is used frequently on AR15 22lr conversion kits. However, when doing this the user looses the ability to drop the mag free since the magazine is essentially being stopped from falling free when the mag release is pressed. The user will either have to pull the magazine out or pull the slide back to its most rearward position and manually engage the slide lock. This will allow for the magazine to drop free.

MSRP: $7.95

Our Price: $5.95

Savings: $2.00

Shipping: Usually Ships in 1 to 2 Business Days
Part #: 200-FOLR-2502

Qty:

Installation Instructions

RESTRICTIONS

1) Remove factory basepad and retainer plate.

2) Remove magazine spring and slide factory follower down to base of magazine so that the load assist pin can be removed from the follower. NOTE: you will not use the load assist pin with the +2 follower.

3) Remove factory follower.

4) Insert HiCap follower into the magazine body.

5) Insert magazine spring into magazine body.

6) Compress spring with retainer plate into magazine body and slide on the basepad.

FN 502 Tactical Magazine Follower