Color coded recoil springs for Glock series pistols

Home > Gun Parts >

Glock Gen 1-3 Recoil Guide Rod - CAPTURED

Captured Guide Rod | Glock springs | springs Glock | recoil spring | recoil pistol speed shooting doubletap | Glock recoil spring | calibration kit | pistolsprings | power factor | guide rod | stainless steel | replacement guide rod

Alternative Views:

For use in Glock 17/17L, 22, 24, 31, 34, 35 Generations 1-3 pistols only.

Making sure you have the correct weight recoil spring in your gun is going to make a difference on how it handles when performing double taps. Too heavy a spring will cause the muzzle to "nose dive" and take longer for you to recover the sight picture before you can shoot again. Too light a spring may cause damage to your pistol. Our Full-length, stainless steel captured guide rod helps prevent spring bind and improves cycling. But best of all it allows you to quickly swap out various springs weights to fine tune your pistol to the ammo you are feeding it for the best performance. We recommend using Blue Loctite on the hex screw threads when switching out springs. This will provide a firm hold and still allow easy removal when necessary.

Each of our springs offered HERE are marked with a different color to help distinguish the weights of each spring for easy identification. Save money and get the CALIBRATION KIT

MSRP: $19.95

Our Price: $14.95

Savings: $5.00

Shipping: Usually Ships in 1 to 2 Business Days
Part #: 101-G3GR-GLOK

Qty:

Installation Instructions

RESTRICTIONS

1) Disassembly pistol by removing slide, barrel and factory recoil spring assembly from the frame
2) Compress factory recoil assembly and remove from barrel and slide
3) Install recoil spring over the end of the guide rod taper end first
4) Compress spring and slip on Gen3 bushing and tighten hex screw to hold in place (We recommend the use of Blue Loctite to help hold into place)
4) Reinstall captured guide rod and spring into slide with the bushing end towards the muzzle