Home > Springs >

Glock Gen 1-3 Recoil Calibration Kit

Glock springs | springs Glock | recoil spring | recoil pistol speed shooting doubletap | Glock recoil spring | calibration kit | pistolsprings | power factor
 
Alternative Views:
For use in Glock 17/17L, 22, 24, 31, 34, 35 Generation 3 pistols only.

Making sure you have the correct weight recoil spring in your gun is going to make a difference on how it handles when performing double taps. Too heavy a spring will cause the muzzle to "nose dive" and take longer for you to recover the sight picture before you can shoot again. Too light a spring may cause damage and introduce feeding failures. Each spring is marked with a different color to help distinguish the weights of each spring for easy identification. Included in our calibration kit is a Full-length, stainless steel guide rod to help prevent spring bind and improve cycling. But best of all it allows you to quickly swap out various springs weights to fine tune your pistol to the ammo you are feeding it for the best performance. You can keep your factory guide rod assembly intact.

International Orders Click HERE
MSRP: $29.95
Our Price: $24.95
Sale Price: $19.95
Savings: $10.00


Shipping: Usually Ships in 1 to 2 Business Days
Part #: 101-G3KT-GLOK
Qty:

Installation Instructions RESTRICTIONS
 
1) Disassembly pistol by removing slide, barrel and factory recoil spring assembly from the frame
2) Compress factory recoil assembly and remove from barrel and slide
3) Install recoil spring over the end of the guide rod taper end first
4) Compress spring and slip on Gen3 bushing and tighten hex screw to hold in place (We recommend the use of Blue Loctite to help hold into place)
4) Reinstall captured guide rod and spring into slide with the bushing end towards the muzzle
Recoil Spring Calibration
VIDEOS
  • Color coded recoil springs for easy identification of various weights

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Glock 17 recoil spring kit September 5, 2023
Reviewer: joseph enamait from Supply, NC United States  
added a compensator to my Glock 17 and it didn't cycle properly with the oem 17 lb spring.  Purchased this kit to be able to 'tune' the spring to get the pistol to function reliably. The metal guide rod is an upgrade from the factory plastic rod.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Glock Gen 1-3 Recoil Calibration Kit February 2, 2023
Reviewer: Anonymous Person from West Chester, OH United States  
Great Co. to deal with,highly recommend.AAA+

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 April 15, 2022
Reviewer: Bryant Kolpak from Mission Hills, CA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product great customer service March 11, 2022
Reviewer: Aaron Romine from Attalla, AL United States  
The god rod tuning kit that I got is fantastic excellent quality and the customer service is impeccable.

Was this review helpful to you?